Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot key fob suddenly stopped working it could be because of an unresponsive battery in the coin-cell, water damage, receiver module issues, or a defective chip. Fortunately, these issues are easy to fix and you'll have your car back to normal in no time!
The blade of the key can get worn-out and cause an unusable car key. You can easily fix this issue by visiting your local Car Key Man Auto Locksmith to replace the blade.
Battery
The battery that powers the key fob on your Peugeot 308 can sometimes die or become too weak to send a strong signal to the car. This can cause the key fob to cease working, preventing you from locking or opening the doors or starting your engine. You'll require a new battery for your key fob to repair this.
You'll need batteries for replacement from an auto parts store or your local hardware store. Make sure that the battery is brand new and has not on the shelf for too long. A brand new battery has more capacity and can transmit a stronger signal to your vehicle.
After replacing the battery try unlocking the doors and locking them with the key fob. If the doors do not unlock it's possible that the receiver module inside the car is at fault. Your local Peugeot dealer can reprogramme the receiver module.
The chip inside the key fob can also be damaged. It's possible to cause damage to your key fob when you drop it on the ground or expose it to moisture. The rubber seals that protect the chip from moisture can get worn out over time, especially if your key ring is exposed to water for prolonged durations, like submerging it in the ocean at the beach. To avoid this happening, it's essential to keep your key fob free from moisture and never let it come into contact with water.
Water Damage
If your key fob gets submerged, whether you dropped it in the pool or threw it into a puddle, don't assume it's a loss. While the key fob has rubber seals that protect it from water, prolonged exposure to water could result in damage to its electronic chip. Water is a great conductor and any water that comes into the key fob could cause the short circuits to be in series which eventually damage the electronic chip. After removing the batteries, clean the contacts using isopropyl. Dry them completely before putting them back in.
Your Peugeot 308 may not start due to the battery being dead. Jumper cables can be a great method of restarting the engine when you have an extra car. If the battery is the issue, it will need to be replaced.
Another possible cause is a defective receiver inside the vehicle that could prevent it from receiving a signal from the key fob. It could be a problem with the antenna or wiring or the key fob might be damaged. It might be necessary to program a new keyfob for your vehicle if you are using one. If you are unable solve the issue, call an expert technician. A trained technician in the field will be able to determine the issue quickly and then fix it right away.
Radio Interference
For example, a key fob not being recognized or having a limited range often mean that there is a problem with the system. The interference could be transmitted or radiated, the latter resulting from speaker and power cables passing too close to electrical components. In general, rerouting cables and moving them away from these components will resolve the issue.
It's unlikely that someone is listening in on the signals from your key fob to steal your car, however it's possible that the signal is being distorted by radio frequency interference. Luckily, this is a simple issue to fix.
If you're having issues with your keys that are not recognized, try a fresh battery. Also, ensure that the battery is the right type and size. peugeot 107 key replacement can cause damage to the fob.
Certain alarm systems from the aftermarket and radar detectors use the same radio frequency as your key fob and this can cause them to interfere with your key signals. It is recommended to avoid using these devices on your key fob.
Pairing Issues
The remote keyless entry system of the car is equipped with an antenna that receives radio frequencies from the key fob. If this receiver has developed a problem, you won't be in a position to begin your vehicle, even if the key fob works and is reset. The issue can result from a variety of things, including the battery of a coin that is dead and water damage. The receiver may also be malfunctioning due to an internal or software issue or damage to the key itself.
One of the main reasons that your Peugeot 308 key fob isn't functioning is because the coin battery inside has died. You can replace it by using a fresh battery, but it is important to get the right battery for your key fob. It is best to use batteries that are the same size with the same voltage, specifications, and specifications as the original.
Another reason your Peugeot 308 key fob might not be working is due to the fact that it has been paired to another vehicle. It is possible that you have accidentally given your key fob to a friend or it was used to unlock other vehicles. This can be resolved by reprogramming your key fob using an OBDII scan. The tool will ask you for details about your car like its VIN or engine type. It is crucial to enter the correct details.